Install the trailing

• Replace the cage nut (1).

  Parts:  Cage nut

  Courtesy of BMW OF NORTH AMERICA, INC.

• Insert the tension strut and position at the swivel bearing (2).
• Replace nut (1).

  Parts:  Nut

• Tighten nut (1). If necessary, counter support at the Torx socket.

Courtesy of BMW OF NORTH AMERICA, INC.

• Position the tension strut (1) on the front subframe.
• Replace the screw (2).

  Parts:  Screw

• Feed in screw (2) and tighten hand-tight.

  The screw connection is tightened later in NORMAL POSITION .

Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to ATTACHING THE FRONT LEFT WHEEL .
• Refer to MEASURING THE RIDE HEIGHT OF THE FRONT AXLE AND ADJUSTING THE NORMAL POSITION .
• Refer to TIGHTENING THE SCREW CONNECTION OF THE TENSION STRUT ON THE FRONT SUBFRAME .
• Refer to INSTALLING BOTTOM FRONT COVER FROM THE SIDE .