Tightening the screw connection of the tension strut on the front subframe
NOTE:
TECHNICAL INFORMATION
Tighten the screw connection in the NORMAL POSITION .
Tighten the screw connection in the NORMAL POSITION .
- Loosen screw (1) for the tension strut (2) by one turn.
- Tighten down screw (1).
TIGHTENING TORQUE SPECIFICATION
| Tension strut to front axle support | ||
| M12 Replace bolt and cage nut. Tighten in normal position. |
Tightening torque | 68 Nm |
| Angle of rotation | 180° | |