Installing bottom front cover from the side
- Install the bottom front cover at side (2).
- Tighten the screws (1).
TIGHTENING TORQUE SPECIFICATION
| Lower side cover at front |
| Hexagon screw for thermoplastic |
Tightening torque |
3 Nm |
 Courtesy of BMW OF NORTH AMERICA, INC.
|
Precondition
Front underbody protection removed.
- Position the bottom front cover from the side (2).
- Tighten down screws (1).
TIGHTENING TORQUE SPECIFICATION
| Lower side cover at front |
| Hexagon screw for thermoplastic |
Tightening torque |
3 Nm |
 Courtesy of BMW OF NORTH AMERICA, INC.
|