Install the Soft-close motor

• Secure Automatic Soft Close drive (3)  on adapter plate (2)  with decoupling elements (1)  .

  Courtesy of BMW OF NORTH AMERICA, INC.

• Attach the Bowden cable (1)  from the Automatic Soft Close drive (3)  on the door lock (2)  .

  Courtesy of BMW OF NORTH AMERICA, INC.

• Install cover (1)  and engage the clips (2)  .

Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to INSTALLING DOOR LOCK .
• Refer to INSTALLING THE FRONT OUTSIDE DOOR HANDLE .
• Refer to PARTIALLY INSTALLING REAR INNER WINDOW CHANNEL STRIP .
• Refer to INSTALLING FRONT DOOR WINDOW GLASS .
• Refer to INSTALLING THE FRONT MODULE BRACKET .
• Refer to CONNECTING ALL BATTERY GROUND LEADS .
• Refer to ADJUSTING DOOR WINDOW GLASS .
• Refer to INSTALLING FRONT DOOR TRIM PANEL .
• Refer to INSTALLING THE OUTER FRONT WINDOW CHANNEL STRIP .