Install front cross connection
- Insert and position front cross connection (3) from above.
- Tighten down screws (2) .
TIGHTENING TORQUE SPECIFICATION
| Reinforcement strut on the front cross connection and bumper bracket | ||
|---|---|---|
| Oval-head screw | tightening torque | 19 Nm |
- Secure expanding rivet (1) .
Follow-up work
- Refer to INSTALLING RIGHT INTAKE SILENCER HOUSING .
- Refer to INSTALLING UPPER CROSS CONNECTION .
- Refer to TIGHTENING THE FRONT-END STRUT ON THE RIGHT .
- Refer to INSTALLING LEFT INTAKE SILENCER HOUSING .
- Refer to TIGHTENING THE LEFT FRONT-END STRUT .
- Refer to INSTALLING THE CENTER ENGINE COMPARTMENT COVER .
- Refer to INSTALLING THE FRONT HOOD SEAL .