Remove support for bumper cover at front bottom

NOTE: RISK OF DAMAGE
Careless handling of tools and sharp-edged components.
Scratches, surface damage.

Protect working area.
Handle tools and components carefully.

Preliminary work

Refer to REMOVING THE FRONT LEFT AND RIGHT WHEELS .
Refer to REMOVING SEAL FOR FRONT HOOD .
Refer to REMOVING THE DECORATIVE FRONT GRILL .
Refer to REMOVING FRONT BUMPER COVER .
Refer to REMOVING THE FRONT SECTION OF THE FRONT WHEEL ARCH COVER ON THE LEFT AND RIGHT .
Refer to REMOVING LEFT AND RIGHT BRAKE VENTILATION DUCT .
Refer to REMOVING THE FRONT UNDERBODY PROTECTION .

Loosen screws (1) and (2) .

Courtesy of BMW OF NORTH AMERICA, INC.
Pivot the support for the front bumper cover (1) downward slightly and guide forward out of the holders.

Courtesy of BMW OF NORTH AMERICA, INC.