Install the side ornamental grille

NOTE: Description is for left component only. Procedure on the right side is identical.

Install the side ornamental grille (1) and engage it along the dashed line at the latch mechanisms.

Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work

Refer to INSTALLING TRIM AT SIDE .
Refer to INSTALLING THE HOLDER FOR THE FOG LIGHT .
Refer to INSTALLING BUMPER COVER, FRONT .
Refer to INSTALLING TEMPERATURE SENSOR .
Refer to PARTIALLY INSTALLING FRONT LEFT AND RIGHT WHEEL ARCH COVER .
Refer to PARTIALLY INSTALLING THE WHEEL ARCH TRIM ON THE FRONT LEFT AND RIGHT .
Refer to INSTALLING THE FRONT CENTER HOOD SEAL .
Refer to INSTALLING HOOD SEAL ON LEFT AND RIGHT SIDES .