Removing and installing/replacing all valves (S55 engine)

Special tools required: 

• 11 4 481
• 11 4 482

Necessary preliminary work: 

• Remove CYLINDER HEAD .
• Remove INTERMEDIATE LEVER .
• Remove ECCENTRIC SHAFT .
• Remove INTAKE CAMSHAFT .
• Remove EXHAUST CAMSHAFT .
• Remove ROCKER ARM .
• Remove VALVE SPRINGS .
• Remove VALVE STEM SEALS .

Arrangement:

1. Intake valve 5 mm dia.
2. Valve stem seal with lower spring cup
3. Valve spring
4. Upper spring cup
5. Valve keys

Courtesy of BMW OF NORTH AMERICA, INC.

If the valves are to be reused, they must be placed in neat order in special tool 11 4 481.

Arrangement:

1. Discharge valve 6 mm dia.
2. Valve stem seal with lower spring cup
3. Valve spring
4. Upper spring cup
5. Valve keys

If the valves are to be reused, they must be placed in neat order in special tool 11 4 482.

Courtesy of BMW OF NORTH AMERICA, INC.

Assemble engine.

Check function of DME.