Removing and installing/replacing seat rails for CFRP bucket seat (GTS only)

Necessary preliminary work: 

• Remove FRONT SEAT (CFRP BUCKET SEAT) .
• Remove PAN FOR CFRP BUCKET SEAT .
• Remove ADAPTER FOR CFRP BUCKET SEAT .

Removal: 

Unhook seat rail (2) on the retaining lug (1).

Feed out seat rail (2) from the connecting linkage (3).

Courtesy of BMW OF NORTH AMERICA, INC.

Unclamp cable tie (1).

Unhook connector (2).

Courtesy of BMW OF NORTH AMERICA, INC.

Unhook seat rail (2) on the retaining lug (1).

Feed out seat rail (2) from the connecting linkage (3).

Courtesy of BMW OF NORTH AMERICA, INC.

Installation: 

Feed in seat rail (2) on the connecting linkage (3).

Hook seat rail (2) onto the retaining lug (1).

Courtesy of BMW OF NORTH AMERICA, INC.

Clip connector (2) onto holder.

Hook cable clip (1) onto the seat rail.

Courtesy of BMW OF NORTH AMERICA, INC.

Feed in seat rail (2) on the connecting linkage (3).

Hook seat rail (2) onto the retaining lug (1).

Courtesy of BMW OF NORTH AMERICA, INC.

Required follow-up work: 

• Install FRONT SEAT (CFRP BUCKET SEAT) .