51 47 157 Removing and installing/replacing cover for left or right capping in luggage compartment (X6 2015-2019)

Necessary preliminary tasks:

Remove luggage compartment wheel arch panel. Refer to 51 47 151 REMOVING AND INSTALLING/REPLACING LEFT LUGGAGE COMPARTMENT WHEEL ARCH TRIM REP-REP-RAF1651-5147151 - V.2 (X6 2015-2019) and 51 47 161 REMOVING AND INSTALLING/REPLACING RIGHT LUGGAGE COMPARTMENT WHEEL ARCH PANEL REP-REP-RAF1651-5147161 - V.2 (X6 2015-2019) .
Remove D-PILLAR TRIM PANEL .

Removal:

Release screws (1) and (2).

Feed out and remove shoulder cover (3) from edge protection along the dashed line (4).

G06212929

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Install shoulder cover (3).

Tighten screws (1) and (2).

NOTE: Edge protection must overlap capping cover (3) along dashed line (4).

G06212929

Courtesy of BMW OF NORTH AMERICA, INC.

Required follow-up work:

Install luggage compartment wheel arch panel. Refer to 51 47 151 REMOVING AND INSTALLING/REPLACING LEFT LUGGAGE COMPARTMENT WHEEL ARCH TRIM REP-REP-RAF1651-5147151 - V.2 (X6 2015-2019) and 51 47 161 REMOVING AND INSTALLING/REPLACING RIGHT LUGGAGE COMPARTMENT WHEEL ARCH PANEL REP-REP-RAF1651-5147161 - V.2 (X6 2015-2019) .
Install TRIM PANEL FOR D-PILLAR .