51 47 151 Removing and installing/replacing left luggage compartment wheel arch trim (X6 2015-2019)
Special tools required:
- 00 9 325
Necessary preliminary tasks:
Removal:
Remove cover (1) using special tool 00 9 325.
Release clamps (1).
Feed out luggage compartment wheel arch panel (2).
Installation:
If replacing with storage compartment package equipment specification:
Remove multifunction hook (1).
Remove tensioning strap (2).
NOTE:
Apertures for multifunction hook (1) and tensioning strap (2) must be cut out from luggage compartment wheel arch panel.
Saw out openings with an oscillating saw and a straight blade on the molding.
Feed in luggage compartment wheel arch panel (2).
Mount clips (1).
Install cover (1).
Required follow-up work:
- Install TRIM ONTO C-PILLAR AT BOTTOM LEFT .
- Install FLAP IN LEFT LUGGAGE COMPARTMENT TRIM PANEL .