51 24 004 Adjusting rear lid lock (X6 2015-2019)

Necessary preliminary tasks:

Prerequisite:

Rear lid must be correctly adjusted to fit; if necessary, ADJUSTING REAR LID .

For ideal adjustment, refer to BODY DIMENSIONS .

Slacken screws (1) until striker (2) can still just be moved and centers itself.

Close rear lid.

Adjust tailgate to BODY DIMENSIONS . .

Tighten down screws (1).

Tightening torque 51 24 3AZ .

NOTE: When the tailgate is closed, the striker must not touch or scrape against the rear lid lock. Look out for scratch marks.

Version with reversing camera:

After adjusting, check reversing camera and if necessary RECALIBRATE .

Required follow-up work:

Courtesy of BMW OF NORTH AMERICA, INC.