66 53 010 Calibrating reversing camera (X6 2015-2019)
NOTE:
Calibration of reversing camera must be carried out after the following work:
- Replacing the RFK
- Repair work on the rear area of the body
- Adjusting work at trunk lid
IMPORTANT:
Follow instructions and specifications in procedure.
To obtain an optimum result, always adhere to the following conditions:
To obtain an optimum result, always adhere to the following conditions:
- Vehicle standing level on headlight adjustment location
- Rear seat bench is unoccupied
- Do not swap seats during calibration
- Steering wheel in straight-ahead position
- Do not move steering wheel
NOTE:
Also switch on reversing camera by means of PDC button.
Calibration can only be carried out with the diagnostic system.
Calibration can only be carried out with the diagnostic system.
Equipment specification with rear view camera:
Carry out the service function:
- Driver assistance
- Rear view camera
- Calibration of the reversing camera
Equipment version with surround view camera:
Carry out the service function:
- Driver assistance
- All-round vision camera
- Calibration and teaching in for surround view camera
Using a special tool is no longer required for vehicles with a production date from 03/2011!