Section 13 (Fuel System - Repair (F48 AWD))
WARNING: This page is about a different variant/trim than selected.
- 13 31 Fuel Pressure Check
- 13 51 High-Pressure Pump
- 13 53 Fuel Injectors, Fuel Rail, Fuel Line, Pressure Sensor
- 13 53 035 Removing and installing/replacing feed line (B46, B48)
- 13 53 156 Removing and installing/replacing rail (B46, B48)
- 13 53 180 Removing and installing/replacing the pressure line between the rail and the high pressure pump (B38, B46, B48)
- 13 53 318 Removing and installing/replacing all injectors (B46, B48)
- 13 53 596 Replacing high pressure fuel sensor (B46, B48)
- 13 54 Throttle Body
- 13 62 Coolant Temperature Sensor, Mass Airflow Sensor, Charge Air Pressure Sensors
- 13 62 531 Replace coolant temperature sensor (B38, B48)
- 13 62 560 Removing and installing/replacing hot film air mass meter (B37, B38, B46, B47, B48)
- 13 62 590 Replacing the charge air pressure sensor (upstream of throttle valve) (B38, B46, B48)
- 13 62 591 Replacing the charge air pressure sensor (on intake plenum) (B38, B46, B48)
- 13 71 Intake Silencer
- 13 72 Engine Air Filter
- 13 90 EVAP Canister Purge Valve