67 31 510 Removing and installing/replacing drive unit for seat cushion tilt adjustment

Necessary preliminary work: 

• Remove driver's or front passenger seat. Refer to 52 15 001 REMOVING AND INSTALLING FRONT SEAT, DRIVER'S SIDE or 52 15 002 REMOVING AND INSTALLING FRONT SEAT, PASSENGER'S SIDE .
• Remove head restraint
• Remove FRONT SEAT COVER

Release screws (1).

Remove cushion shell (2).

Courtesy of BMW OF NORTH AMERICA, INC.

Detach spring (1) at seat frame (2).

Courtesy of BMW OF NORTH AMERICA, INC.

Remove fuse (1) from shaft (2).

Courtesy of BMW OF NORTH AMERICA, INC.

Unscrew nuts (1).

Pull drive with transmission (3) out of seat frame (2) and remove.

Courtesy of BMW OF NORTH AMERICA, INC.

Unlock plug connection (2) and disconnect.

Unfasten screws (3).

Tightening torque: 67 31 1AZ .

Remove drive unit for seat cushion tilt adjustment (1).

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement: 

INITIALIZE  seat height adjustment drive unit.