Mount head airbag

• Thread in gas generator (3)  with folding pack and position it.
• Tighten down screws (2)  .
  TIGHTENING TORQUE SPECIFICATIONS
  
  

  Head airbag
  	Tightening torque	8 Nm

  Courtesy of BMW OF NORTH AMERICA, INC.

• Connect plug connection (1)  and lock.
• Clip in the clamps (2)  .
• Tighten down screw (1)  .
  TIGHTENING TORQUE SPECIFICATIONS
  
  

  Head airbag
  	Tightening torque	8 Nm

  Courtesy of BMW OF NORTH AMERICA, INC.

• Clip in the clip (3)  .
• Clip in the clamps (2)  .
• Tighten the screws (1)  .
  TIGHTENING TORQUE SPECIFICATIONS
  
  

  Head airbag
  	Tightening torque	8 Nm

  Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to CONNECTING THE BATTERY EARTH LEAD .
• Refer to INSTALLING THE HEADLINING (LOWERED WITH PANORAMA ROOF) .
• Refer to INSTALLING THE BELT FEED TRIM .
• Refer to INSTALLING THE TOP LEFT AND RIGHT B-PILLAR TRIM PANELS .
• Refer to INSTALLING THE LEFT AND RIGHT A-PILLAR TRIM PANELS .
• Refer to INSTALLING THE ROOF FUNCTION CENTER .
• Refer to INSTALLING THE COUNTER SUPPORTS FOR THE SUN VISOR ON LEFT AND RIGHT .
• Refer to INSTALLING THE LEFT AND RIGHT SUN VISORS .
• Refer to INSTALLING THE COVER ON THE INSIDE MIRROR .
• Refer to INSTALLING ALL GRAB HANDLES .
• Refer to INSTALLING THE TRIM PANEL FOR LEFT AND RIGHT THE LUGGAGE COMPARTMENT CAPPING .
• Refer to INSTALLING LUGGAGE COMPARTMENT WHEEL ARCH TRIM PANEL AT LEFT .
• Refer to INSTALLING THE LUGGAGE COMPARTMENT WHEEL ARCH TRIM PANEL ON THE RIGHT .
• Refer to INSTALLING C-PILLAR TRIM PANEL AT BOTTOM LEFT AND RIGHT .
• Refer to INSTALLING THE DOOR SILL COVER STRIP ON THE REAR LEFT AND RIGHT .
• Refer to INSTALLING THE LUGGAGE COMPARTMENT FLOOR COVERING .
• Refer to INSTALLING HOOK AND LOOP TAPE FOR THE VEHICLE TOOL KIT .
• Refer to INSTALLING TOOLKITS .
• Refer to INSTALLING THE EMERGENCY WHEEL .
• Refer to INSTALLING LOADING EDGE TRIM .
• Refer to INSTALLING THE LUGGAGE COMPARTMENT REMOVABLE PANEL .