41 11 205 Stripping Operations - Replacing Complete Left Carrier Support
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2016 BMW 328i xDrive, 2016 BMW 328d xDrive, 2015 BMW 328i xDrive, 2015 BMW 328d xDrive, and 2014 BMW 328i xDrive. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Owing to the different engine variants and equipment specifications, not all the components are taken into consideration.
The following list basically represents the removal sequence.
The following list basically represents the removal sequence.
- Disconnect BATTERY EARTH LEAD
- Remove BUMPER TRIM
- Remove intake silencer housing (REMOVING INTAKE SILENCER HOUSING (N20, N26) or REMOVING INTAKE FILTER HOUSING (N47) )
- Remove coolant expansion tank (COOLANT EXPANSION TANK (N20, N26) or COOLANT EXPANSION TANK (N47) )
- Remove FRONT UNDERBODY PROTECTION
- Remove CENTER FRONT PANEL
- Remove DEFORMATION ELEMENT FOR FRONT LEFT BUMPER PANEL
- Remove DSC HYDRAULIC UNIT
- Release line for air conditioning on capacitor
- Remove LEFT WISHBONE
- Remove TRIM PANEL FOR COVER ON SIDE MEMBER
- Remove FRONT WHEEL ARCH COVER (FRONT SECTION)
- Remove FRONT WHEEL ARCH COVER (REAR SECTION)
- Remove FRONT SIDE PANEL
- Partially release left wiring harness