Self Diagnosis - N74 - Diagnostic Trouble Codes - DTC P15D0 (BMW DTC 20A701) Through DTC U1128 (BMW DTC CDC304)

• DTC P15D0; BMW DTC 20A701: Coolant pump, speed deviation: outside tolerance
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P15D1; BMW DTC 20A801: Coolant pump, deactivation: internal temperature too high
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P15D2; BMW DTC 20A802: Coolant pump, shutdown: Overvoltage detected
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P15D3; BMW DTC 20A804: Coolant pump, shutdown: Pump blocked
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P15D4; BMW DTC 20A901: Coolant pump, operation with reduced output: Dry-running detected
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P15D5; BMW DTC 20A902: Coolant pump, operation with reduced output: Undervoltage detected
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P15D6; BMW DTC 20A904: Coolant pump, power-reduced operation: temperature limit 1 exceeded
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P15D7; BMW DTC 20A908: Coolant pump, power-reduced operation: temperature limit 2 exceeded
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC U1170; BMW DTC 20AA04: Coolant pump, communication: malfunction
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC U1171; BMW DTC 20AB08: Coolant pump, emergency operation input: No voltage
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P0832; BMW DTC 20B001: Clutch switch, electric: short circuit to positive or open circuit
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P0831; BMW DTC 20B002: Clutch switch, electric: short circuit to ground
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P3226; BMW DTC 20C001: Electronics-box fan, activation: short circuit to positive
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P3227; BMW DTC 20C002: Electronics-box fan, activation: short circuit to ground
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P3228; BMW DTC 20C004: Electronics-box fan, activation: open circuit
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P3255; BMW DTC 210001: Generator: Under excitation during starting phase
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P0620; BMW DTC 210201: Alternator, electric: malfunction
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P325A; BMW DTC 210301: Alternator, plausibility, electric: calculated
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P0A3B; BMW DTC 210401: Alternator, temperature: overtemperature
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P324C; BMW DTC 210501: Alternator, plausibility, temperature: overtemperature calculated
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P3223; BMW DTC 210601: Alternator, mechanical: malfunction
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P324E; BMW DTC 210701: Alternator, regulator: model incorrect
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P324A; BMW DTC 210801: Alternator, model incorrect
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC U1132; BMW DTC 210901: Alternator, communication: no communication
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P160C; BMW DTC 213301: Power management: overvoltage
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P160D; BMW DTC 213401: Power management: undervoltage
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P160A; BMW DTC 213501: Power management: battery exhaustive discharge
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P160F; BMW DTC 213601: Power management: closed-circuit current violation
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P160F; BMW DTC 213604: Power management: closed-circuit current violation
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P160E; BMW DTC 213701: Power management: Ripple in system voltage too high
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P150A; BMW DTC 215001: Intelligent battery sensor, signal: bus fault
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P150B; BMW DTC 215004: Intelligent battery sensor, signal: bus fault
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P150C; BMW DTC 215008: Intelligent battery sensor, signal: software error
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P150D; BMW DTC 215101: Intelligent battery sensor, function: temperature fault
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P150E; BMW DTC 215104: Intelligent battery sensor, function: voltage fault
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P150F; BMW DTC 215108: Intelligent battery sensor, function: current fault
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P151A; BMW DTC 215201: Intelligent battery sensor, signal transfer: wake-up line, short circuit to ground
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P151C; BMW DTC 215204: Intelligent battery sensor, signal transfer: internal fault
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P151B; BMW DTC 215208: Intelligent battery sensor, signal transfer: level, wake-up line, implausible
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P150E; BMW DTC 215401: Intelligent battery sensor (IBS): internal voltage measurement implausible
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P150F; BMW DTC 215501: Intelligent battery sensor (IBS): internal current measurement implausible
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P150D; BMW DTC 215601: Intelligent battery sensor (IBS): internal temperature measurement implausible
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P151C; BMW DTC 215701: Intelligent battery sensor (IBS) faulty
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P15C5; BMW DTC 215801: Intelligent battery sensor (IBS): wake-up line, short circuit to positive or ground
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P15CE; BMW DTC 215801: Intelligent battery sensor (IBS): wake-up line, short circuit to positive or ground
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P15C4; BMW DTC 215901: Intelligent battery sensor (IBS): incorrect version
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P15CF; BMW DTC 215901: Intelligent battery sensor (IBS): incorrect version
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P15C3; BMW DTC 215A01: Intelligent battery sensor (IBS): wake-up line, open circuit
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P0A16; BMW DTC 219001: Active engine mount, electric: short circuit to positive
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P0A15; BMW DTC 219002: Active engine mount, electric: short circuit to ground
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P0A14; BMW DTC 219004: Active engine mount, electric: open circuit
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P0AB8; BMW DTC 219101: Active engine mount 2, electrical: short circuit to positive
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P0AB7; BMW DTC 219102: Active engine mount 2, electrical: short circuit to ground
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P0AB6; BMW DTC 219104: Active engine mount 2, electrical: open circuit
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P16D2; BMW DTC 231501: Active DTC reporting: DTC buffer full
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P16D3; BMW DTC 231502: Active DTC reporting: DTC sending faulty
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC U1190; BMW DTC 231F04: Electronic transmission control (EGS), PT-CAN, PT-CAN2: Communication fault
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC U1169; BMW DTC 233004: Message (OBD sensor, diagnosis, status, 0x5E0, 0x8C) missing, Digital Motor Electronics, integrated automatic heating / air conditioning system receiver, instrument panel transmitter
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC U029D; BMW DTC CD8510: none
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC U1185; BMW DTC CD840A: none
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC U119E; BMW DTC CD8420: none
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P10DD; BMW DTC CD8408: FlexRay data bus: Hardware faulty
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC U1184; BMW DTC CD8486: none
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P16DC; BMW DTC CD8487: none
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC U11B6; BMW DTC CD9201: Radiator shutter, LIN communication: Timeout
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC P304F; BMW DTC CD9202: Radiator shutter, LIN communication: Invalid message
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC U119D; BMW DTC CD9304: Bit-serial data interface, signal: communication fault
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC U1117; BMW DTC CD9902: Message (vehicle speed, 55.3.4) not up-to-date, Digital Motor Electronics / Digital Diesel Electronics receiver, Integrated Chassis Management transmitter
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC U1118; BMW DTC CD9904: Message (vehicle speed, 55.3.4) missing, Digital Motor Electronics / Digital Diesel Electronics receiver, Integrated Chassis Management transmitter
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC U1119; BMW DTC CD9908: Message (vehicle speed, 55.3.4) incorrect checksum, Digital Motor Electronics / Digital Diesel Electronics receiver, Integrated Chassis Management transmitter
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC U1197; BMW DTC CD9A02: Message (actual braking torque, sum, 43.3.4) not up-to-date, Digital Motor Electronics / Digital Diesel Electronics receiver, Dynamic Stability Control transmitter
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC U1198; BMW DTC CD9A04: Message (actual braking torque, sum, 43.3.4) missing, Digital Motor Electronics / Digital Diesel Electronics receiver, Dynamic Stability Control transmitter
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC U1199; BMW DTC CD9A08: Message (actual braking torque, sum, 43.3.4) incorrect checksum, Digital Motor Electronics / Digital Diesel Electronics receiver, Dynamic Stability Control transmitter
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC U1195; BMW DTC CD9B02: Message (actual crankshaft speed, wheel, 46.0.1) not up-to-date, Digital Motor Electronics / Digital Diesel Electronics receiver, Dynamic Stability Control transmitter
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC U116D; BMW DTC CD9B04: Message (actual crankshaft speed, wheel, 46.0.1) missing, Digital Motor Electronics / Digital Diesel Electronics receiver, Dynamic Stability Control transmitter
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC U1196; BMW DTC CD9B08: Message (actual crankshaft speed, wheel, 46.0.1) incorrect checksum, Digital Motor Electronics / Digital Diesel Electronics receiver, Dynamic Stability Control transmitter
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC U1120; BMW DTC CD9C04: Message (actual steering angle, driver, 59.0.2) missing, Digital Motor Electronics / Digital Diesel Electronics receiver, steering column switch cluster transmitter
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC U1125; BMW DTC CD9F02: Message (Dynamic Stability Control stabilization, 47.1.2) not up-to-date, Digital Motor Electronics / Digital Diesel Electronics receiver, Dynamic Stability Control transmitter
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC U1126; BMW DTC CD9F04: Message (Dynamic Stability Control stabilization, 47.1.2) missing, Digital Motor Electronics / Digital Diesel Electronics receiver, Dynamic Stability Control transmitter
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC U1127; BMW DTC CD9F08: Message (Dynamic Stability Control stabilization, 47.1.2) incorrect checksum, Digital Motor Electronics / Digital Diesel Electronics receiver, Dynamic Stability Control transmitter
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC U11B0; BMW DTC CDA602: Message (request, torque, crankshaft, gearbox 2, 0xA0) not up-to-date, Digital Motor Electronics / Digital Diesel Electronics receiver, twin-clutch gearbox, EGS transmitter
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC U11B1; BMW DTC CDA604: Message (request, torque, crankshaft, gearbox 2, 0xA0) missing, Digital Motor Electronics / Digital Diesel Electronics receiver, twin-clutch gearbox, EGS transmitter
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC U11B2; BMW DTC CDA608: Message (request, torque, crankshaft, gearbox 2, 0xA0) incorrect checksum, Digital Motor Electronics / Digital Diesel Electronics receiver, twin-clutch gearbox, EGS transmitter
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC U1101; BMW DTC CDA804: Message (relative time, 0x328) missing, Digital Motor Electronics / Digital Diesel Electronics receiver, instrument panel transmitter
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC U0137; BMW DTC CDA904: Message (status, trailer, 0x2E4) missing, Digital Motor Electronics / Digital Diesel Electronics receiver, trailer module transmitter
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC U1129; BMW DTC CDAB04: Message (reverse gear, 0x3B0) missing, Digital Motor Electronics / Digital Diesel Electronics receiver, footwell module transmitter
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC U11A5; BMW DTC CDAC04: Message (status, transmission control unit, 0x39A) missing, Digital Motor Electronics / Digital Diesel Electronics receiver, EGS transmitter
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC U112D; BMW DTC CDAD04: Message (control, crash shutdown, electric fuel pump, 0x135) missing, Digital Motor Electronics / Digital Diesel Electronics receiver, Crash Safety Module transmitter
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC U113C; BMW DTC CDAE04: Message (time display, 0x2F8) missing, Digital Motor Electronics / Digital Diesel Electronics receiver, instrument panel transmitter
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC U113A; BMW DTC CDAF04: Message (central locking system and lid status, 0x2FC) missing, Digital Motor Electronics / Digital Diesel Electronics receiver, Car Access System transmitter
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC U1193; BMW DTC CDB002: Message (data, transmission line, 0x1AF) not up-to-date, Digital Motor Electronics / Digital Diesel Electronics receiver, EGS transmitter
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC U11A0; BMW DTC CDB004: Message (data, transmission line, 0x1AF) missing, Digital Motor Electronics / Digital Diesel Electronics receiver, EGS transmitter
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC U1194; BMW DTC CDB008: Message (data, transmission line, 0x1AF) incorrect checksum, Digital Motor Electronics / Digital Diesel Electronics receiver, EGS transmitter
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC U11AA; BMW DTC CDB102: Message (request, torque, crankshaft, gearbox, 0x0B0) not up-to-date, Digital Motor Electronics / Digital Diesel Electronics receiver, twin-clutch gearbox, EGS transmitter
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC U11AB; BMW DTC CDB104: Message (request, torque, crankshaft, gearbox, 0x0B0) missing, Digital Motor Electronics / Digital Diesel Electronics receiver, twin-clutch gearbox, EGS transmitter
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC U11AC; BMW DTC CDB108: Message (request, torque, crankshaft, gearbox, 0x0B0) incorrect checksum, Digital Motor Electronics / Digital Diesel Electronics receiver, twin-clutch gearbox, EGS transmitter
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC U119B; BMW DTC CDB204: Message (ambient temperature, 0x2CA) missing, Digital Motor Electronics / Digital Diesel Electronics receiver, instrument panel transmitter
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC U111C; BMW DTC CDB504: Message (kilometer reading / range, 0x330) missing, Digital Motor Electronics / Digital Diesel Electronics receiver, instrument panel transmitter
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC U111D; BMW DTC CDB602: Message (clamp, 0x12F) not up-to-date, Digital Motor Electronics / Digital Diesel Electronics receiver, Car Access System transmitter
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC U111E; BMW DTC CDB604: Message (clamp, 0x12F) missing, Digital Motor Electronics / Digital Diesel Electronics receiver, Car Access System transmitter
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC U111F; BMW DTC CDB608: Message (clamp, 0x12F) incorrect checksum, Digital Motor Electronics / Digital Diesel Electronics receiver, Car Access System transmitter
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC U11A7; BMW DTC CDB904: Message (diagnosis, OBD gearbox, 0x396) missing, Digital Motor Electronics / Digital Diesel Electronics receiver, twin-clutch gearbox, EGS_EL transmitter
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC U11B3; BMW DTC CDBB02: Message (request, torque, crankshaft, gearbox 2, 0xA0) not up-to-date, Digital Motor Electronics / Digital Diesel Electronics receiver, twin-clutch gearbox, EGS transmitter
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC U11B4; BMW DTC CDBB04: Message (request, torque, crankshaft, gearbox 2, 0xA0) missing, Digital Motor Electronics / Digital Diesel Electronics receiver, twin-clutch gearbox, EGS transmitter
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC U11B5; BMW DTC CDBB08: Message (request, torque, crankshaft, gearbox 2, 0xA0) incorrect checksum, Digital Motor Electronics / Digital Diesel Electronics receiver, twin-clutch gearbox, EGS transmitter
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC U11A6; BMW DTC CDBF04: Message (status, transmission control unit, 0x39A) missing, Digital Motor Electronics / Digital Diesel Electronics receiver, twin-clutch gearbox, EGS transmitter
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC U11A4; BMW DTC CDC004: Message (diagnosis, OBD gearbox, 0x396) missing, Digital Motor Electronics / Digital Diesel Electronics receiver, twin-clutch gearbox, EGS transmitter
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC U11A1; BMW DTC CDC102: Message (data, transmission line, 0x1AF) not up-to-date, Digital Motor Electronics / Digital Diesel Electronics receiver, twin-clutch gearbox, EGS transmitter
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC U11A2; BMW DTC CDC104: Message (data, transmission line, 0x1AF) missing, Digital Motor Electronics / Digital Diesel Electronics receiver, twin-clutch gearbox, EGS transmitter
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC U11A3; BMW DTC CDC108: Message (data, transmission line, 0x1AF) incorrect checksum, Digital Motor Electronics / Digital Diesel Electronics receiver, twin-clutch gearbox, EGS transmitter
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC U11AD; BMW DTC CDC202: Message (request, torque, crankshaft, EGS, 0x0B0) not up-to-date, Digital Motor Electronics / Digital Diesel Electronics receiver, twin-clutch gearbox, EGS transmitter
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC U11AE; BMW DTC CDC204: Message (request, torque, crankshaft, EGS, 0x0B0) missing, Digital Motor Electronics / Digital Diesel Electronics receiver, twin-clutch gearbox, EGS transmitter
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC U11AF; BMW DTC CDC208: Message (request, torque, crankshaft, EGS, 0x0B0) incorrect checksum, Digital Motor Electronics / Digital Diesel Electronics receiver, twin-clutch gearbox, EGS transmitter
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction
• DTC U1128; BMW DTC CDC304: Message (status, electric fuel pump, 0x335) missing, Digital Motor Electronics / Digital Diesel Electronics receiver, electric fuel pump transmitter
  • Information saved in
  • Fault code
  • Fault description
  • Condition for fault identification
  • Condition for fault memory entry
  • Action in service
  • Fault effect and breakdown warning
  • Driver information
  • Service instruction