LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2009 >> 650i 2D Convertible, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 1965 (Body Panel System - Tightening Torques (E82)) >> Rear Lid >> 41 62 Rear Lid

41 62 Rear Lid

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 BMW 128i, 2012 BMW 128i, 2011 BMW 128i, 2010 BMW 135i, and 2010 BMW 128i. However, it is still accessible from the selected car via links, so may be relevant.
REAR LID - TIGHTENING TORQUE SPECIFICATION TABLE

- Type Thread Tightening specification Measure
1AZ Rear lid to rear lid hinge E63 M6x22 - 10 Nm
- E64 M8x24 - 18.5 Nm
- E61 ASA nut M8 - 20 Nm
- E61 M10 nut - 38 Nm
- E60 M8x19.5 8.8 - 18.5 Nm
- E83/E85/E86 M8 - 20 Nm
- E81/E87/E70 M8 - 18.5 Nm
- E71 M10 x 25 - 10.9 - 18.5 Nm
- E90/E92/E82/E88 M8 - 15 Nm
- E91 M8 - 30 Nm
- E93 M8x25 - 20 Nm
2AZ Adjustment, rear lid hinge E91 M8 - 20 Nm
3AZ Rear lid hinge to body E61/E83/E85/E86/E90/E92/E82/E88 M8 - 20 Nm
- E60/E64/E81/E87 M8 nut - 18.5 Nm
- E63/E70/E71 M8 - 18.5 Nm
- E91 M8 nut - 20 Nm
4AZ Hinge pin E60 M8 nut - 18.5 Nm
5AZ Grounding cable strap to hinge E87 M5 nut - 4.4 Nm
6AZ Rear lid, bottom, to rear lid hinge, bottom E70 M8x22 - 18.5 Nm
7AZ Rear lid hinge, bottom, to body E70 M8x22 - 18.5 Nm
8AZ Setscrew to rear lid hinge E70 - - 18.5 Nm
9AZ Stop, rear lid to body E70/E71 M6 x 21 - 6 Nm
- E70/E71 M6 nut - 6 Nm
- E70/E71 M12x1.5 - 16 Nm