LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2009 >> 650i 2D Convertible, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 1936 (Body Equipment - Repair (E82)) >> Rear Lid Trim Panel >> 51 49 000 Removing And Installing/Replacing Panel For Rear Lid

51 49 000 Removing And Installing/Replacing Panel For Rear Lid

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2013 BMW 128i, 2012 BMW 128i, 2011 BMW 128i, 2010 BMW 135i, and 2010 BMW 128i. However, it is still accessible from the selected car via links, so may be relevant.

Release both brackets (1) and remove warning triangle.

Fig 1: Identifying Brackets
G05779409Courtesy of BMW OF NORTH AMERICA, INC.

Release screws and remove both brackets (1).

Release expansion rivets (2) and remove trim (3).

Installation: 

If necessary, replace damaged expander rivets (2).

Fig 2: Identifying Expansion Rivets, Brackets & Trim
G05779410Courtesy of BMW OF NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals