LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2020 >> SQ8 Premium Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 149 (Wires) >> 97 Wires >> Wiring Harness And Connector Repairs >> Antenna Wires, Repairing >> Aerial Cable Repair Set:VAS6720 >> Notes

Aerial Cable Repair Set:VAS6720: Notes

WARNING: This page is about a different car, the 2024 Audi SQ7, 2024 Audi Q7, 2023 Audi SQ7, and 2023 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.

Checking the antenna wire. Refer to Checking the Antenna Wire 

Replacing the tool head. Refer to Replacing Tool Head 

Cutting the antenna wire. Refer to Cutting Antenna Wire 

Removing the insulation from the shield. Refer to Removing Insulation From The Shield 

Removing the outer jacket of insulation: Removing Outer Jacket of Insulation 

Removing the inner insulation. Refer to Removing Inner Insulation 

Crimping the inner conductor. Refer to Crimping Inner Conductor 

Crimping the outer conductor. Refer to Crimping Outer Conductor 

Special tools and workshop equipment required 

The Aerial Cable Repair Set:VAS6720  makes it possible to perform a quality repair on antenna wires RG 174 (blue) and RTK 031 (black). The set contains the insulation removal tools and the crimping tools for both antenna wires. Moreover, all the individual parts needed are in the kit. Only the zero-coded coupler (green) is needed. All other connection wires for the different Infotainment systems can be found in the Parts Information in table 035-XX. These adapter antenna wires must always be ordered separately depending on the vehicle type. All part numbers needed for reordering can be found in this table. The each compartment in the kit has a part number. The repair kit is based on the Wiring Harness Repair Set VAS1978B.

NOTE:

Additional information: Aerial Cable Repair Set:VAS6720  Operating Instructions.