Overview - Bevel Box
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2017 Audi S3, 2017 Audi A3 Quattro, 2016 Audi S3, 2016 Audi A3 Quattro, and 2016 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.
- Bolt
- Tightening specification -item 3- : Bolt
- Heat Shield
- For drive axle
- Bolt
- Tightening specification. Refer to DRIVE AXLE HEAT SHIELD, REMOVING AND INSTALLING .
- Bolt
- Tightening specification. Refer to OVERVIEW - DRIVESHAFT .
- Heat Shield
- For driveshaft
- Bolt
- Tightening specification. Refer to OVERVIEW - DRIVESHAFT .
- Bevel Box
- Removing. Refer to BEVEL BOX, REMOVING .
- Installing. Refer to BEVEL BOX, INSTALLING .
- Bolt
- Tightening specification. Refer to BEVEL BOX, TIGHTENING SPECIFICATION .
- Always replace after removing
- Bracket
- For bevel box
- There are different versions. Refer to the Parts Information for the correct allocation.
- Bolt
- Tightening specification and sequence. Refer to BEVEL BOX, TIGHTENING SPECIFICATION .
- Bolt
- Tightening specification and sequence. Refer to BEVEL BOX, TIGHTENING SPECIFICATION .