Section 10 (Clutch - Manual Transmission 0B2 AWD (Coupe) (As Of 09.2009))

• Clutch
  • Description And Operation
    • Clutch, Servicing
    • Clutch, SACHS Assembly Overview
      • Notes
      • How To Recognize Manufactured By SACHS
      • Check The Plastic Washer -A- Inside The Dual Mass Flywheel Manufactured By SACHS
      • Measuring The Wear On The Plastic Washer Inside The Dual Mass Flywheel Manufactured By SACHS
      • Checking The Needle Bearing Inside The Dual Mass Flywheel On A 4-Cylinder TDI Vehicle: Vehicle (Except On The 125 Kw TDI)
      • Sac Clutch Pressure Plate, Checking For Distortion, Cracks And Burn Marks
      • Checking Ends Of The Diaphragm Spring
      • Checking The Pull-Springs And Rivet Connection
      • Checking The Metal Ring
    • Clutch Release Mechanism Assembly Overview
      • Notes
      • Checking The Release Bearing Through 02.2008
      • Release Bearing With Pressure Ring -1- From February 2008
      • Lubricating The Release Bearing
    • Clutch, LUK Assembly Overview
      • Notes
      • Checking The Needle Bearing Inside The Dual Mass Flywheel On A 4-Cylinder TDI Vehicle: Vehicle (Except On The 125 Kw TDI)
      • Clutch Pressure Plate, Checking For Distortion, Cracks And Burn Marks
      • Checking Ends Of The Diaphragm Spring
      • Checking The Pull-Springs And Rivet Connection
  • Specifications
    • Fastener Tightening Specifications
  • Diagnosis And Testing
    • Clutch Pressure Plate Adjusting Ring, LUK, Resetting
  • Removal And Installation
    • Clutch Module
      • Notes
      • Removing
      • Install The Clutch Module
    • Clutch Release Lever With Release Bearing And Guide Sleeve
      • Removing
      • Installing
    • Clutch Pressure Plate And Clutch Plate, SACHS
      • Notes
      • Removing
      • Installing
    • Clutch Pressure Plate And Clutch Plate, LUK
      • Notes
      • Removing
      • Installing
    • Dual Mass Flywheel Needle Bearing, SACHS And LUK
      • Notes
      • Removing
      • Removing The Shaft Seal From The Dual Mass Flywheel
      • Removing The Needle Bearing From The Dual Mass Flywheel
      • Installing The Dual Mass Flywheel Needle Bearing
      • Installing The Shaft Seal Into The Dual Mass Flywheel
  • Special Tools