Checking The Pull-Springs And Rivet Connection

I - Pull-springs OK

• Slight offset in the outer area -arrows A-.
  Fig 1: Checking Pull-Springs And Rivet Connection

  Courtesy of AUDI OF AMERICA, LLC

II - Pull-springs damaged

• The pressure plate must be replaced if the pull-spring is bent or broken off -arrow B-.

-- Make sure the rivet connections -arrows B- fit correctly on all pull-springs -A-.

Fig 2: Checking Connections Of Springs And Rivet Connections

Courtesy of AUDI OF AMERICA, LLC

• Replace any pressure plates that have loose rivet connections -arrow B-.