Dual-mass flywheel, component overview
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2009 Audi S4, 2008 Audi S4, 2007 Audi S4, 2006 Audi S4, and 2005 Audi S4. However, it is still accessible from the selected car via links, so may be relevant.
1 - Dual mass flywheel
- Removing and installing → Dual-mass flywheel, removing and installing
2 - Needle bearing
- Pulling out and driving in → Dual-mass flywheel needle bearings, pulling out and driving in
3 - Special bolt
- Replace
- Tightening torque Torque specification
4 - Crankshaft
5 - Sealing ring for crankshaft -timing chain side-
- Replacing → Crankshaft seal (timing chain side), replacing .