LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 6 (4.2L - Engine Mechanical, Engine Code(S): BHF) >> 13 - Engine - Crankshaft, Cylinder Block >> Timing chain side, servicing >> Dual-mass flywheel, removing and installing >> Torque specification

Torque specification

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2009 Audi S4, 2008 Audi S4, 2007 Audi S4, 2006 Audi S4, and 2005 Audi S4. However, it is still accessible from the selected car via links, so may be relevant.
Component Nm
Dual-mass flywheel to crankshaft  
Bolt length 22.5 mm 60 plus an additional 90 ° * See note

* 90 ° corresponds to one quarter rotation.

*Replace bolts.

scientia non olet · About LEMON Manuals