CYLINDER HEAD, VALVETRAIN (4-Cylinder TDI Common Rail 1.6L; 2.0L 4V Engine) -- (A3 SEDAN)

• 15 Cylinder Head, VALVETRAIN
  • Toothed Belt Drive
    • Overview - Toothed Belt Guard
    • Overview - Toothed Belt
    • Toothed Belt Guard, Removing And Installing
      • Upper Toothed Belt Guard, Removing And Installing
        • Notes
        • Removing
        • Installing
        • Tightening Specifications
      • Lower Toothed Belt Guard, Removing And Installing
        • Removing
        • Installing
        • Tightening Specifications
    • Toothed Belt, Removing From Camshaft
      • Notes
      • Removing
      • Installing (Adjusting Valve Timing)
      • Correcting The Valve Timing
      • Continue If The Valve Timing Is Correct
      • Assembling
      • Tightening Specifications
    • Toothed Belt, Removing And Installing
      • Notes
      • Removing
      • Installing (Adjusting Valve Timing)
      • Check Valve Timing
      • Correcting The Valve Timing
      • Assembling
      • Tightening Specifications
  • Cylinder Head
    • Overview - Cylinder Head Cover
      • Notes
      • Cylinder Head Cover, Tightening Specification And Sequence
    • Overview - Cylinder Head
      • Notes
      • Checking Cylinder Head For Distortion
      • Cylinder Head Gasket Identification
      • Cylinder Head - Tightening Specification And Sequence
    • Cylinder Head Cover, Removing And Installing
      • Notes
      • Removing
      • Installing
      • Tightening Specifications
    • Fuel Injector Seals, Removing And Installing
      • Notes
      • Procedure
    • Camshaft Housing, Removing And Installing
      • Notes
      • Removing
      • Installing
      • Tightening Specifications
    • Cylinder Head, Removing And Installing
      • Notes
      • Removing
      • Installing
      • Tightening Specifications
    • Compression, Checking
      • Notes
      • Procedure
      • Assembling
  • VALVETRAIN
    • Overview - VALVETRAIN
      • Notes
      • Tightening Specification And Sequence For The Camshaft Housing
      • Camshaft Adjuster Housing - Tightening Specification And Sequence
    • Camshaft Seal, Removing And Installing
    • Camshaft Adjustment Valve 1 - N205-, Removing And Installing
      • Notes
      • Removing
      • Installing
      • Tightening Specifications
    • Camshaft Adjuster, Removing And Installing
      • Notes
      • Removing
      • Installing
      • Tightening Specifications
    • Camshaft Adjustment Valve 1 - N205- Control Valve, Removing And Installing
      • Notes
      • Removing
      • Installing
      • Tightening Specifications
    • Valve Shaft Seals, Removing And Installing
      • Valve Shaft Seals, Removing And Installing, Cylinder Installed
        • Notes
        • Procedure
        • Cylinder 1, 3 And 4
        • Cylinder 2
        • Assembling
      • Valve Shaft Seals, Removing And Installing, Cylinder Removed
        • Notes
        • Procedure
        • Assembling
  • Intake And Exhaust Valves
    • Valve Guides, Checking
      • Notes
      • Procedure
    • Valves, Checking
    • Valve Dimensions
  • Special Tools