Camshaft Housing, Removing And Installing: Notes
Special Tools And Workshop Equipment Required
- Socket Bit XZN 10:T10501 or TORX® ball head T30, commercially available
- Applicator Gun:VAS6966
- Hand Drill with Plastic Brush Attachment
- Protective Eyewear
- Sealant. Refer to the Parts Information.
CAUTION:
This procedure contains mandatory replaceable parts. Refer to component overview prior to starting procedure.
Mandatory Replacement Parts
- Bolts - Camshaft housing
- Seal - Emissions control system
- Screw-Type clamp - Emissions control system