LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> A3 TDI Prestige >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> CYLINDER HEAD, VALVETRAIN (4-Cylinder TDI Common Rail 1.6L; 2.0L 4V Engine) -- (A3 SEDAN) >> 15 Cylinder Head, VALVETRAIN >> VALVETRAIN >> Camshaft Adjuster, Removing And Installing >> Installing

Camshaft Adjuster, Removing And Installing: Installing

Install in reverse order of removal. Note the following: 

CAUTION:

- Check the installation of the friction disc (diamond disc) between the camshaft adjuster and the camshaft stub.

-- Pay attention after installing the friction disc

-- Install the upper toothed belt guard. Refer to UPPER TOOTHED BELT GUARD, REMOVING AND INSTALLING .

-- An adaptation must be performed after replacing or removing and installing the camshaft adjuster by using the Vehicle Diagnostic Tester under Guided Functions  , 01 - Adapting the Electric Actuator with Feedback  .

scientia non olet · About LEMON Manuals