LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2012 >> TT Base, 2D Convertible >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Seats >> Seat Frames (Roadster) >> Seat Frames >> Description And Operation >> Manual Front Seats >> Front Seat Assembly Overview

Front Seat Assembly Overview

NOTE:
  • The overview is based on the driver's seat. The passenger's seat is similar and the components are installed reversed from left to right.
  • The carpet was not shown in the illustration for clarity reasons.
Fig 1: Identifying Front Seat Assembly Overview
GWWA72-10629Courtesy of AUDI OF AMERICA, LLC
  1. Seat rail cover
  2. Bolt
    • 40 Nm
    • Quantity: 4
  3. Trim
  4. Front seat
  5. Handle
  6. Trim
  7. Retaining loop with push button
    • For seat belt
    • Roadster only
  8. Backrest adjusting wheel
  9. LATCH child seat anchor
  10. Seat height adjustment handle
  11. Lumbar support adjustment mechanism
  12. Seat rail cover
  13. Rear console
    • Welded with floor assembly
  14. Front console
    • Welded with floor assembly
  15. Trim
  16. Storage compartment
  17. Handle
  18. Seat Forward/Back Adjustment Stop