Section 38 (3.0L - Cylinder Head & VALVETRAIN - Engine Code: CATA)
WARNING: This page is about a different car, the 2011 Audi Q7, 2010 Audi Q7, and 2009 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.
- 15 Cylinder Head, VALVETRAIN
- Timing Chain Guards
- Chain Drive
- Camshaft Timing Chains Overview
- Camshaft Timing Chains, Removal From Camshafts
- Camshaft Timing Chain, Removing And Installing
- Timing Mechanism Drive Chain Overview
- Timing Mechanism Drive Chain, Removing And Installing
- Power Take-Off Drive Chain Overview
- Power Take-Off Drive Chain, Removing And Installing
- Balance Shaft Overview
- Balance Shaft, Removing And Installing
- Cylinder Head
- VALVETRAIN
- Valve Train Overview
- Camshaft, Measuring Axial Clearance
- Camshaft, Measuring Radial Clearance
- Camshaft Seal, Removing And Installing
- Left Cylinder Head Camshaft, Removing And Installing
- Right Cylinder Head Camshaft, Removing And Installing
- Hydraulic Adjusting Elements, Checking
- Valve Stem Seals, Cylinder Head Installed, Removing And Installing
- Valve Stem Seals, Removing And Installing With Cylinder Head Removed
- Valve Dimensions
- Valve Guides, Checking
- Valves, Checking
- Special Tools