Power Take-Off Drive Chain Overview
WARNING: This page is about a different car, the 2011 Audi Q7, 2010 Audi Q7, and 2009 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.
- Power Take-Off Drive Chain
- Removing and Installing. Refer to POWER TAKE-OFF DRIVE CHAIN, REMOVING AND INSTALLING POWER TAKE-OFF DRIVE CHAIN, REMOVING AND INSTALLING .
- Drive Sprocket for Oil Pump
- Installed position: the side with lettering on it faces the engine.
- Bolt
- Tightening specification, refer to -Item 13- OIL PUMP AND OIL PAN LOWER SECTION OVERVIEW .
- Thrust Washer
- Pressure Spring
- Crankshaft
- Bolt
- 23 Nm
- Balance Shaft Chain Sprocket
- Installed position: the side with lettering on it faces the transmission.
- Bolt
- 9 Nm
- Chain Tensioner
- With glide track.
- Seal
- Replace