Balance Shaft Overview
WARNING: This page is about a different car, the 2011 Audi Q7, 2010 Audi Q7, and 2009 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.
- Friction Bearing
- Bolt
- 60 Nm
- When loosening or tightening, counterhold with the Diesel Injection Pump Locking Pin 3359.
- Balance Shaft Transmission Side
- Bolt
- 9 Nm
- Insert with locking compound.
- Gear Carrier
- Balance Shaft Belt Pulley Side
- Bolt
- 60 Nm
- When loosening or tightening, counterhold with the Diesel Injection Pump Locking Pin 3359.
- Friction Bearing
- Balance Shaft
- Removing and Installing. Refer to BALANCE SHAFT, REMOVING AND INSTALLING .