Secondary Air Injection Pump: Installing
WARNING: This page is about a different car, the 2010 Audi Q7, 2009 Audi Q7, 2008 Audi Q7, and 2007 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.
- Tightening specifications, refer to SECONDARY AIR INJECTION SYSTEM VERSION 2 OVERVIEW .
Installation is in reverse order of removal, note the following:
-- Install right turn signal housing. Refer to SIDE MARKER LAMP AND TURN SIGNAL HOUSING, REMOVING AND INSTALLING .
-- Install right headlamp. Refer to HEADLAMP, REMOVING AND INSTALLING .