SUBFRAME Mount Assembly Overview: Notes
WARNING: This page is about a different car, the 2009 Audi TT and 2008 Audi TT. However, it is still accessible from the selected car via links, so may be relevant.
- Bolt
- Replace
- 40 Nm plus an additional 90°
- Transmission plate to transmission
- Bolts
- Replace
- 40 Nm plus an additional 90°
- Pendulum support to transmission
- Engine Support
- Bolt
- Engine support to engine
- Torque specification, refer to [For engine(s) CETA, CCTA] Description and Operation or refer to [For engine(s) CDMA] Description and Operation or refer to [For engine(s) CBRA] Description and Operation or refer to [For engine(s) BPY] Description and Operation
- Engine Mount
- Bolt
- Engine mount to body
- Torque specification, refer to [For engine(s) CETA, CCTA] Description and Operation or refer to [For engine(s) CDMA] Description and Operation or refer to [For engine(s) CBRA] Description and Operation or refer to [For engine(s) BPY] Description and Operation
- Connecting Bar
- Bolt
- Connecting bar to engine
- Torque specification, refer to [For engine(s) CETA, CCTA] Description and Operation or refer to [For engine(s) CDMA] Description and Operation or refer to [For engine(s) CBRA] Description and Operation or refer to [For engine(s) BPY] Description and Operation
- Bolt
- Connecting bar to body
- Torque specification, refer to [For engine(s) CETA, CCTA] Description and Operation or refer to [For engine(s) CDMA] Description and Operation or refer to [For engine(s) CBRA] Description and Operation or refer to [For engine(s) BPY] Description and Operation
- Bolt
- Engine mount to body
- Torque specification, refer to [For engine(s) CETA, CCTA] Description and Operation or refer to [For engine(s) CDMA] Description and Operation or refer to [For engine(s) CBRA] Description and Operation or refer to [For engine(s) BPY] Description and Operation
- Bolts
- Engine mount to engine support
- Torque specification, refer to [For engine(s) CETA, CCTA] Description and Operation or refer to [For engine(s) CDMA] Description and Operation or refer to [For engine(s) CBRA] Description and Operation or refer to [For engine(s) BPY] Description and Operation
- Pendulum Support
- Removing and installing, refer to PENDULUM SUPPORT
- Bolt
- Replace
- 100 Nm plus an additional 90°
- Pendulum support to subframe
- Bolt
- Replace
- 60 Nm plus an additional 90°
- Transmission mount to transmission plate
- Bolt
- Replace
- 40 Nm plus an additional 90°
- Transmission mount to body
- Transmission Mount
- Removing and installing, refer to TRANSMISSION MOUNT
- Tightening sequence TRANSMISSION SIDE SUBFRAME MOUNT TIGHTENING SEQUENCE
- Bolt
- Replace
- 40 Nm plus an additional 90°
- Transmission plate to transmission
- Bolt
- Replace
- 40 Nm plus an additional 90°
- Transmission plate to transmission
- Transmission Plate
- Tightening sequence TRANSMISSION SIDE SUBFRAME MOUNT TIGHTENING SEQUENCE