Steering Column Switch Module Overview
- The steering column switch module consists of coil connector with slip ring, Steering Angle Sensor -G85-, steering column switch (turn signal indicator switch, wiper switch, cruise control switch) and Steering Column Electronic Control Module -J527-.
- Perform Fault Finding in "Guided Fault Finding" using the Vehicle Diagnostic Tester.
- Coil Connector with Slip Ring
- Removing and Installing, refer to AIRBAG SPIRAL SPRING/RETURN SPRING WITH SLIP RING, REMOVING AND INSTALLING .CAUTION:
Coil connector with slip ring is not to be turned following removal.
- Removing and Installing, refer to AIRBAG SPIRAL SPRING/RETURN SPRING WITH SLIP RING, REMOVING AND INSTALLING .
- Steering Angle Sensor -G85-
- Removing and Installing, refer to Steering Angle Sensor -G85-, REMOVING AND INSTALLING .
- Socket Head Bolt
- 0.65 Nm
- Cruise Control Switch -E45-
- Removing and Installing, refer to Cruise Control Switch -E45-, REMOVING AND INSTALLING .
- Socket Head Bolt
- 0.65 Nm
- Turn Signal Switch -E2-
- Removing and Installing, refer to Turn Signal Switch -E2-, REMOVING AND INSTALLING .
- Retainer
- Steering Column Electronic Control Module -J527-
- Removing and Installing, refer to Steering Column Electronic Control Module -J527-, REMOVING AND INSTALLING .
- Connector assignment of Steering Column Electronic Systems Control Module Steering Column Electronic Control Module -J527-, refer to FRONT Steering Column Electronic Control Module -J527- CONNECTOR ASSIGNMENT .
- Clamping Bolt
- 3 Nm
- Windshield Wiper/Washer Switch -E22-
- Removing and Installing, refer to Windshield Wiper/Washer Switch -E22-, REMOVING AND INSTALLING .
- Socket Head Bolt
- 0.65 Nm