Installing Surrounding Components
WARNING: This page is about a different car, the 2004 Volvo S40, 2003 Volvo S40, 2002 Volvo S40, 2001 Volvo S40, and 2000 Volvo S40. However, it is still accessible from the selected car via links, so may be relevant.
Install:
- the heat deflector plate. Tighten to 10 Nm
- the tie rods on the wheel spindles. See Installing the Ball Joint On the Tie Rod
- the rear engine mounting on the transmission. Tighten to 60 Nm .