Installing Other Components

Installing the lock cable on the gear selector 

Fig 1: Installing Cable On Steering Wheel Lock Cylinder

Courtesy of VOLVO CARS OF NORTH AMERICA.

Install: 

• the control arm (A)
• the mechanical cable (B)
• the screw (D) holding the mechanical cable. Tighten to 3 Nm 
• the cover
• the two screws (C) for the cover.

Install: 

• the wiper and turn signal lamp switch according to Installing the Switch
• the contact reel, steering wheel and steering wheel module according to Installing Contact Reel
• the soundproofing according to Installing the Soundproofing
• the battery lead according to Installation .