Valve clearance, checking: Finishing

WARNING: This page is about a different car, the 2004 Volvo S40, 2003 Volvo S40, 2002 Volvo S40, 2001 Volvo S40, and 2000 Volvo S40. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: For tightening torques not in the text, see Tightening torques for 4-cylinder gasoline engines .

Fig 1: Ignition Coil Connectors

Courtesy of VOLVO CARS OF NORTH AMERICA.

Install:

the plugs for the test holes. Tighten to 20 Nm
the ignition coils according to the earlier markings
the ground connections
the connector for the variable valve timing solenoid.

Remove tool 9995753 .

Fig 2: Ignition Coil Connectors

Courtesy of VOLVO CARS OF NORTH AMERICA.

Install:

a new cover over the intake camshaft
the right front wheel. See Installing the wheels .