Filling and bleeding the cooling system
WARNING: This page is about a different car, the 2004 Volvo S40, 2003 Volvo S40, 2002 Volvo S40, 2001 Volvo S40, and 2000 Volvo S40. However, it is still accessible from the selected car via links, so may be relevant.
- Fill the cooling system via the expansion tank
- Open the bleed nipple between the engine and the engine coolant heater. Close the nipple as soon as only coolant comes out.
The total coolant capacity is approximately 5.0 liters
- Run the engine until the thermostat opens. Top up if necessary
- Check for leakage, see Checking For Leakage In the Cooling System .