Handling replaced SRS airbags / seat belt tensioners: Handling
WARNING: This page is about a different car, the 2004 Volvo S40, 2003 Volvo S40, 2002 Volvo S40, 2001 Volvo S40, and 2000 Volvo S40. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:
Non-deployed pyrotechnical SRS components must not be deployed or ignited inside the vehicle.
For disarming of non-deployed pyrotechnical SRS units, see: Non-triggered SRS components, destruction .
When removing, refer to the instructions in:
- See After a collision in which the SRS system has been deployed
- See Airbag steering wheel module, steering wheel and contact reel replacement
- See Replacing the passenger airbag module
- See Replacing the SRS module
- See Replacing front seat belts
- See Seat belts replacement, rear seat
WARNING:
Airbag modules / pyrotechnical seat belt tensioners must never be taken apart, repaired or transferred to another vehicle.
WARNING:
Under no circumstances use an ohmmeter or other live measuring instrument to take readings on a disconnected non-deployed airbag / pyrotechnical seat belt tensioner. This could deploy the airbag / pyrotechnical seat belt tensioner