Installing the Propeller Shaft
WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.
Install the propeller shaft using the marking made earlier.
Check carefully that the mating surfaces on the propeller shaft and flange are clean. Install the 6x M8 screws and washers. Tighten. See Summary Of Tightening Torques For Specific Components . Use counterhold 9997057 .
Install the 2x M8 screws to the propeller shaft center bearing. Tighten.