Installing the steering wheel shaft joint
WARNING: This page is about a different car, the 2002 Volvo C70, 2001 Volvo C70, 2000 Volvo C70, 1999 Volvo C70, and 1998 Volvo C70. However, it is still accessible from the selected car via links, so may be relevant.
Align the steering wheel shaft joint on the steering gear.
Fit a new steering wheel shaft screw. Tighten in accordance with Summary of tightening torques for specific components .
Connect the cable to the stepper motor/solenoid.
Check the position of the tie rod in the steering gear in accordance with Measuring the position of the tie rod in the steering gear .