Removing engine compartment components

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2006 Volvo S80, 2005 Volvo S80, 2004 Volvo S80, 2003 Volvo S80, and 2002 Volvo S80. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Engine Compartment Covers

Courtesy of VOLVO CARS OF NORTH AMERICA.

Only applies to turbo engines, remove:

the torque rod in accordance with: Brake fluid reservoir, replacing
the cover at the side of the air cleaner (ACL) housing (applies only to B5254T4)
the fresh air intake hose
the air cleaner (ACL) housing assembly. Unhook the control valve from the air cleaner (ACL) housing.

Fig 2: Locating Air Cleaner Housing, Vacuum Hoses And Ground Strap

Courtesy of VOLVO CARS OF NORTH AMERICA.

Applies only to naturally aspirated engines, remove:

the upper torque rod in accordance with: Brake fluid reservoir, replacing
the air cleaner (ACL) housing with the intake manifold and preheating hose
the vacuum hoses, 2, from the intake manifold to the control valves
the ground lead between the mounting on the engine and the bulkhead (where applicable).