Boot, Half Shaft, Replacing: Disassembly: Notes
NOTE:
Preparatory Work, Left-Hand Side: See Preparations And Remove The Drive Shaft From The Transmission . Preparatory Work, Right-Hand Side: See Fig 1 and procedure. And Remove The Drive Shaft From The Gearbox .
Position a mobile jack under the control arm at light contact.
Remove the screws and nuts between the spring strut and the wheel spindle.
Press the drive shaft together as much as possible. Angle the hub out and remove the drive shaft from the hub.
Allow the drive shaft to rest on the control arm.
Hang the wheel spindle on a hook.