Remove The Drive Shaft From The Gearbox

Fig 1: Removing/Installing Drive Shaft From Gearbox

Courtesy of VOLVO CARS OF NORTH AMERICA.

Remove:

Pull The Drive Shaft Straight Out From The Gearbox.

NOTE:

Do Not Damage The Drive Shaft When Removing It From The Transmission.

Fig 2: Identifying Rubber Seal & Constant Velocity Joint

Courtesy of VOLVO CARS OF NORTH AMERICA.

CAUTION:

Later Models Have A Rubber Seal On The Constant Velocity Joint. Do Not Damage The Seal. It Will Be Needed For Installation.