Overview - Hood
- Hood
- Refer to Hood, Removing and Installing .
- Refer to Hood, Adjusting .
- Striker
- Refer to Striker, Removing and Installing .
- Refer to Striker, Adjusting .
- Nut
- 9 Nm
- Quantity: 2
- Adjusting Buffer
- Refer to Adjusting Buffer, Adjusting .
- Quantity: 4
- Hinge
- Refer to Hinge, Removing and Installing .
- Refer to Hinge, Adjusting .
- Nut
- 20 Nm
- Quantity: 4
- Bolt
- 20 Nm
- Quantity: 4
- Support Rod
- Refer to Support Rod, Removing and Installing .
- Hood Latch
- With Engine Hood Contact Switch -F266-
- Refer to Hood, Removing and Installing .
- Refer to Hood, Adjusting .
- Bolt
- 12 Nm
- Replace after removing
- Quantity: 2
- Rubber Grommet for Support Rod
- Bracket for Support Rod
- Bolt
- 8 Nm
- Quantity: 2
- Bolt
- 2 Nm
- Quantity: 2
- Mount for Hood
- Quantity: 2
- Bolt
- 4.5 Nm
- Quantity: 2