LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2018 >> Beetle S, 2D Hatchback >> Repair and Diagnosis >> External Pages >> Different car >> Section 72 (Clutch - Manual Transmission 0A4 (Convertible)) >> 30 Clutch >> Removal And Installation >> Clutch Slave Cylinder >> Tightening Specifications

Tightening Specifications

WARNING: This page is about a different car, the 2013 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.

Clutch slave cylinder to the transmission, refer to -item 9- in the CLUTCH RELEASE MECHANISM OVERVIEW .

Transmission shift lever to gear shift shaft, refer to -item 6- in the SHIFT CABLE AND SELECTOR CABLE OVERVIEW .

Cable bracket to transmission, refer to -item 15- in the SHIFT CABLE AND SELECTOR CABLE OVERVIEW .

Transmission support to transmission mount bracket and transmission bolts -arrows-, refer to ENGINE AND TRANSMISSION MOUNT OVERVIEW .

Fig 1: Identifying Transmission Support And Slave Cylinder
GWWN34-10355Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.