Fender Brace: Installing
WARNING: This page is about a different car, the 2016 Volkswagen Beetle, 2015 Volkswagen Beetle, 2014 Volkswagen Beetle, and 2013 Volkswagen Beetle. However, it is still accessible from the selected car via links, so may be relevant.
-- Install the fender brace -2-.
-- Install the nut that attaches the front fender to the fender brace -2-, refer to FENDER OVERVIEW .
-- Install the bolt for the carrier plate that connects the headlamp to the fender brace -2-, refer to HEADLAMP .
-- Install the guide profile to the front bumper cover, refer to GUIDES AND BRACKETS OVERVIEW .
-- Install the front bumper cover, refer to FRONT BUMPER COVER .
-- Align the fender brace and the fender to the hood and bumper.
| Component | Tightening Specifications |
|---|---|
| Bolts on fender brace | 6 Nm |