Determining Clutch Manufacturer
Either a "Sachs" or a "LuK" clutch may be installed.
It is possible to tell which clutch the vehicle has with the transmission installed:
-- Remove the noise insulation from the oil pan if necessary, refer to Removal and Installation .
There are some openings -arrows- between the engine -A- and the transmission -B- near the bottom of the oil pan.
-- Check the outer contour of the flywheel through these openings.
-- The outer contour of the flywheel can also be inspected by removing the small cover plate -A-.
Round Outer Contour -arrows- is a clutch manufactured by "Sachs" -A- :
-- For clutch removing and installing, refer to CLUTCH, WITH DUAL MASS FLYWHEEL, MANUFACTURED BY SACHS .
-- Clutch overview, refer to CLUTCH OVERVIEW, WITH DUAL MASS FLYWHEEL, MANUFACTURED BY SACHS .
Squared Outer Contour -arrows 1- and a Circulated Depression -arrow 2- is a clutch manufactured by "LuK " -B-.
or
Round Outer Contour -arrows 1- and a Circulated Depression -arrow 2- is a clutch manufactured by "LuK " -B-.
-- For clutch removing and installing, refer to CLUTCH, WITH DUAL MASS FLYWHEEL, MANUFACTURED BY LUK .
-- Clutch overview, refer to CLUTCH OVERVIEW, WITH DUAL MASS FLYWHEEL, MANUFACTURED BY LUK .